Home > BLDC Driver Board >

JYQD-V7.3E2 Three Phase BLDC Driver Board For 42mm 57mm BLDC Motor

Product Categories

Changzhou Bextreme Shell Motor Technology Co.,Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

JYQD-V7.3E2 Three Phase BLDC Driver Board For 42mm 57mm BLDC Motor

Name: JYQDV73E2 Three Phase BLDC Driver Board For 42mm 57mm BLDC Motor
Brand: Juyi
Price: 1 USD

Quality JYQD-V7.3E2 Three Phase BLDC Driver Board For 42mm 57mm BLDC Motor wholesale

Brand Name : Juyi

Model Number : JYQD-V7.3E2

Place of Origin : China

MOQ : 1 set

Price : Negotiable

Payment Terms : T/T, L/C

Supply Ability : 1000 pcs per day

Delivery Time : 5-30days

Packaging Details : Carton+packing foams

Operating voltage : 12V-36V

Operating current : 1-15A

Sensor : Hall sensor

Size : 63X42.5X17mm (L*W*H)

Speed control : 0.1V-5V or PWM input

Contact Now

Product Description

JYQD-V7.3E2 is very compact size BLDC motor driver board with necessary standard functions,its favorable price and reliable performance are competitive for industrial and commercial applications.Its widely applied by the worldwide clients almostly for 8 years,its mature and stable design are competent for many applications.

JYQD-V7.3E2 Three Phase BLDC Driver Board For 42mm 57mm BLDC Motor

MODEL NO.	JYQD-V7.3E2
OPERATING TEMPERATURE	-20—85℃
OPERATING VOLTAGE	12V-36VDC
MAX WORKING CURRENT	15A
PWM SPEED REGULATION	PWM Frequency :1K-10KHz, 0-100% dutycycle
ANALOG VOLTAGE SPEED REGULATION	0-5V

Application guidelines

1: Confirm that the voltage and power paraparameters of the motor not exceed the range as specified.2: Applicable to Hall brushless dc motor with Hall sensor angle at 120°,not all manufacturers' Hall line sequence are corresponding,you can adjust the Hall line sequence or motor's 3 phase sequence according to to the the actual situation, to achive the best driving effect.

3: JYQD-V7.3E2 is driver board without housing and heatsink, it can drive the BLDC motor below 100W without any heatsink,but needs normal ventilation.
 4: The "5V" pin on the driver board is forbidden to connect with external power equipment.it is only suit for external potentiometer or switch for speed adjustment,reversing and singnal swtiching operation.

Description of wiring

1. Control port5V — Driver board internal output voltage, for external potentiometer or switch for speed adjustment and reversing operation 
Z/F —Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0V low level or connect to GND is reverse direction. 
VR —Speed control port. Analog voltage linear speed regulation 0.1V -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100% 
EL —Enable port control. Connect 5V or no connect to enable operation, connect GND to disable operation. 
Singnal—Speed pulse signal output 
GND—Used for Driver board internal control 
2. Power port
MA ----motor phase A 
MB ---- motor phase B 
MC---- motor phase C 
P- ----DC-
P+----DC + 
3: Hall sensor port 
Ha--- Hall a 
Hb--- Hall b 
Hc--- Hall c
GND---GND 
5V---5V input 
4: Remarks
1. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use. 
2. Control port distance: 2.54mm,Power port distance:3.96 mm
3. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
 

Overall dimensions

Board size customizable to your requests.

Please contact us if you need technical support.OEM,ODM service are available!

Product Tags:

Three Phase BLDC Driver Board

JYQD-V7.3E2 BLDC Driver Board

57mm BLDC Motor Driver Board